Yuannengji Rondelet e murit LED luajnë një rol shumë të rëndësishëm në dekorimin e ndriçimit të jashtëm. They can be seen everywhere in the night sky and above the buildings in the city. Everyone has always wanted to know how to install LED wall washers, how the wiring method affects the installation, and how beautiful they are outdoors after installation.
1: The wiring method of high-voltage AC220V wall washers is generally single-sided wiring. Low-voltage single-sided wiring lamps are large-W lamps, such as 48W, 36W, etc., all come out of a three-core sheathed wire with red and black power wires and yellow ground wires.
2: The left and right sides of the lamps are wired out. This type is generally DC24V voltage, and both sides are waterproof connectors. This low-voltage lamp can be connected in series, but the power wattage of the wall washers is relatively large. Përgjithësisht, 18W and 24W wall washers can be connected in series for 4 meters after being connected to the national standard 1 square back line. It is recommended that a 400W switching power supply be connected to a 24W wall washer for 12 meters and an 18W wall washer for 15-16 meters.
3: There is also a central waterproof docking plug line, which can be low-voltage or high-voltage. This type of lamp is more often connected in series, and can be connected in series for 20 meters. This type of installation and wiring is much simpler, but it is recommended to use low-voltage, which is more stable and has better performance.
The outlet methods of wall washers are basically the above three. We recommend that customers choose the outlet method according to their actual on-site installation method. This is more reasonable and does not affect the appearance after installation. The lamps can also be sprayed with the same color as the exterior wall, so that they cannot be seen during the day.