YUANNENGJI LED wall washers play a very important role in outdoor lighting decoration. They can be seen everywhere in the night sky and above the buildings in the city. Everyone has always wanted to know how to install LED wall washers, how the wiring method affects the installation, and how beautiful they are outdoors after installation.
1: The wiring method of high-voltage AC220V wall washers is generally single-sided wiring.
Low-voltage single-sided wiring lamps are large-W lamps, such as 48W, 36دبليو, الخ., all come out of a three-core sheathed wire with red and black power wires and yellow ground wires.
2: The left and right sides of the lamps are wired out.
This type is generally DC24V voltage, and both sides are waterproof connectors. This low-voltage lamp can be connected in series, but the power wattage of the wall washers is relatively large. Generally, 18W and 24W wall washers can be connected in series for 4 meters after being connected to the national standard 1 square back line. It is recommended that a 400W switching power supply be connected to a 24W wall washer for 12 meters and an 18W wall washer for 15-16 متر.
3: There is also a central waterproof docking plug line, which can be low-voltage or high-voltage.
This type of lamp is more often connected in series, and can be connected in series for 20 متر. This type of installation and wiring is much simpler, but it is recommended to use low-voltage, which is more stable and has better performance.
The outlet methods of wall washers are basically the above three. نوصي العملاء باختيار طريقة المخرج وفقًا لطريقة التركيب الفعلية في الموقع. هذا أكثر منطقية ولا يؤثر على المظهر بعد التركيب. يمكن أيضًا رش المصابيح بنفس لون الجدار الخارجي, حتى لا يمكن رؤيتها أثناء النهار.